|
|
|
|
| LEADER |
04765aam a2200349 a 4500 |
| 001 |
c000400423 |
| 003 |
CARM |
| 005 |
20171221101020.0 |
| 008 |
171221s2005 nyua 000 0 eng |
| 010 |
|
|
|a 2005007144
|
| 019 |
1 |
|
|a 69841825
|5 LACONCORD2021
|
| 020 |
|
|
|a 0971306990 (pbk.)
|
| 035 |
|
|
|a (OCoLC)58536095
|5 LACONCORD2021
|
| 040 |
|
|
|a DLC
|c DLC
|d DLC
|d VCARM
|
| 042 |
|
|
|a pcc
|
| 050 |
0 |
0 |
|a VM355
|b .O45 2005
|
| 082 |
0 |
0 |
|a 623.82/9
|2 22
|
| 100 |
1 |
|
|a Olivette, Michael J.,
|d 1957-
|
| 245 |
1 |
0 |
|a Building an Adirondack guideboat :
|b wood strip reproductions of the Virginia /
|c Michael J. Olivette and John D. Michne.
|
| 250 |
|
|
|a 1st ed.
|
| 260 |
|
|
|a Utica, N.Y. :
|b Nicholas K. Burns Pub.,
|c c2005.
|
| 300 |
|
|
|a ix, 236 p. :
|b ill. ;
|c 28 cm.
|
| 505 |
0 |
|
|a 1. From Humble Beginnings -- 2. Evolution Continued -- 3. Tools, Screws, and Glues. Power Tools -- Hand Tools -- Screws -- Glue -- What Glue to Use? -- 4. First, We Need a Plan. Patterns and Drawings -- Lofting the Ribs -- A Curious Aside -- Lofting the Stem -- Computer-aided Design (CAD) -- 5. - Patterns and Forms. Patterns -- Constructing the Bottom Board Quarter Pattern -- Determining Rib Foot Lengths -- Forms -- 6. Making the Ribs. The Wood -- Cutting the Laminations -- Bending Considerations -- Doing the Bending -- Bending With Dry Heat -- Gluing the Blanks -- Cleanup and Shaping -- An Alternate Method for Shaping Ribs -- Finishing Up -- 7. Creating the Skeleton. The Concept of Rocker -- Building the Stock Plank -- Building the Construction Jigs -- Building the Bottom Board -- Forming the Rolling Beveled Edges -- Attaching the Ribs -- Screw Alignment and Insertion -- Attaching the Inner Stems -- Mounting the Bottom Board to the Stock Plank -- The Alignment Battens -- Scribe Ribs -- 8. The Strips. The Wood -- Making Strips versus Buying Them -- Strip Length -- Strip Width -- Strip Thickness -- Cutting the Strips -- Routing the Edges -- Gang-Cutting Strips -- Cutting the Bead -- Cutting the Cove -- 9. Stripping the Hull. The Old and the New -- Fairing the Ribs and Stems -- The Sheer Strips -- Stripping the Hull -- 10. Fairing, Filling, and Sanding. The Outer Stems -- Filling and Sanding the Hull -- 11. Fiberglassing. Why Do We Fiberglass? -- Buying Epoxy and Fiberglass -- Epoxy Considerations -- Doing the Wet Out -- The Fill Coats -- Scraping and Sanding -- 12. Inside Cleanup and Gunwales. Righting and Supporting the Hull -- Gunwales --
|
| 505 |
0 |
0 |
|a Contents note continued: Fitting and Mounting the Gunwales -- Deck Recesses -- 13. Decks. Deck Beams -- Carlins -- Breast Hooks -- Deck Circles (Coaming) -- Deck Planks -- Deck Center Capping Strip -- Coamings Revisited -- Rib Ends and Gunwale Cleanup -- 14. Seats, Cleats, and Risers. Selecting the Cane -- Middle Seat -- Bow and Stern Seats -- Seat Backrests -- Caning the Seats -- Rising or Seat Cleats -- Yoke Cleats -- 15. Finishing. The Whys, Wherefores, and Whats -- Before You Start -- Spraying -- Painting -- Varnishing -- Varnishing the Exterior Hull -- Rubbing Out the Finish -- Varnishing the Interior of the Hull -- Decks and other Trim -- 16. Brass Accessories and Hardware. Tools -- Materials -- A Few Words About Brass -- Making the Stem Caps -- Making the Stem Bands -- Making the Painter Ring and Staple -- Installing the Stem Bands -- Putting It All Together -- Making and Installing the Bottom Stem Band Section -- Installing the Shoe-Irons -- Siding Protectors -- Yoke Ferrules -- Rowlocks and Rowlock Plates -- Builder's Nameplate -- Some Weighty Words -- 17. Standard and Optional Equipment. Oars -- Paddles -- Footplates and Floor Grates -- Constructing the Floor Grate -- Foot Braces -- Carving a Carry Yoke -- Making the Templates -- Roughing Out -- Hollowing the Inside -- 18. Guideboat Care and Maintenance. Transportation -- Repairs -- Replacing Loose or Missing Screws -- Replacing Seat Risers -- Scratches and Dents -- Refinishing a Painted Hull -- Seat Cane Maintenance -- Storage -- Cleaning Brass -- A Final Construction Note -- Afterwords -- Appendix 1. John Gardner's Drawings of the Adirondack Guideboat Virginia -- Appendix 2. Screw Sizes and Quantities -- Appendix 3. Working with Epoxy -- Appendix 4. Making Scarf Joints -- Appendix 5. Sources -- Glossary.
|
| 650 |
|
0 |
|a Adirondack guide-boats
|x Design and construction.
|
| 700 |
1 |
|
|a Michne, John D.,
|d 1937-
|
| 852 |
8 |
|
|b CARM
|p 0489234
|f BK
|
| 852 |
8 |
|
|b SCAN
|h A3:AH26C0
|i F09559
|p 0489234
|f BK
|
| 856 |
4 |
1 |
|3 Table of contents
|u http://www.loc.gov/catdir/toc/ecip059/2005007144.html
|
| 999 |
f |
f |
|i d29b4a1b-7fa8-5a73-b8db-ba493c277ac0
|s 6e9551f0-a7b8-5062-b199-4507b7dcabc3
|
| 952 |
f |
f |
|p Can circulate
|a CAVAL
|b CAVAL
|c CAVAL
|d CARM 1 Store
|i book
|m 0489234
|
| 952 |
f |
f |
|a CAVAL
|b CAVAL
|c CAVAL
|d Unmapped Location
|e F09559
|f A3:AH26C0
|h Other scheme
|